Analog halls (also known as linear halls) are transducers that provide an electrical signal at its output proportional to the relative position of the shaft of a rotor to a predetermined reference. They are based on the Hall effect, and the output signal that they provide is continuous.
This view allows configuration of Analog Halls parameters.
|Offset||Defines the offset of each analog hall component. The value ranges from 1 (min) to 65535 (max). A value of 32767 (default) represents no offset.|
|Gain||Defines a gain to each analog hall component. The value ranges from 1 (min) to 65535 (max). A value of 65535 represents a gain of 1.|