Skip to main content
Skip table of contents

Analog Signal

An analog signal connected to one of the available analog inputs can be used as a feedback. User must specify the Analog Input used.

Depending on the ADC bits of the selected analog input, the resolution available will change. For instance if using a 12 bits analog input, the resolution for the feedback will be:

Check your Servo Installation Manual to verify the available Analog Inputs and their number of ADC bits.

Quick Test

The quick test monitors in real time the encoder position read, according to actual encoder configuration and user units selected.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.